Miniature stainless steel pneumatic hammer

Miniature stainless steel pneumatic hammer SX-20-2

1.jpg

The impact strength of the miniature stainless steel pneumatic hammer SX-20-2 is adjusted by adjusting the air supply pressure. If the knocking force is too small to prevent the blockage, the air pressure can be increased. On the contrary, if the knocking force is too large, the pressure will be reduced. If the customer chooses the wrong model, the impact force is too strong or insufficient, and the pressure can also be adjusted to solve the impact of the hammer. This structure that can change the impact force ensures the convenience of air hammer selection. If the air hammer is installed with relay piping, several units can run at the same time. The construction cost is greatly reduced.


Product features

•　All made of stainless steel, widely used in the pharmaceutical industry.
•　One-click, each action generates a shock wave.
•　Impact force and impact interval can be adjusted as required.
•　High-strength 304 stainless steel housing, stainless steel mounting base, stainless steel clamp.
•　Utilizing the principle of pneumatic energy storage, the hammer head is momentarily stressed and the impact force of the air hammer is increased.


2.jpg

The air hammer output force can only make a single impact for a small range, which has the least impact on other equipment. Such impact will not cause the moisture content of the raw materials to be separated out or the raw materials of the mixture to be separated again. Commonly used in the cleaning of tanks of scales, prevention of blockage of pipes or elbows, tanks of materials with high moisture content or mixed raw materials or low specific gravity.



1488779984847817.jpg



model

use pressure

Knock cycle

Air consumption

Percussion energy

impact

Inlet diameterExhaust caliberMonolithic materialweight

  MPa

Next / min

                    NL / time

N·M

K·M/S

Corresponding hammer strikekg

SX-20-2

 0.3~0.7

 1~60

0.04~0.11

                      4.3~8.35

0.6~0.8

0.6以下PS 1/8PS 1/8SS316

0.9

 微型不鏽鋼氣動錘-2_看圖王d.jpg

168官方开奖App-168开奖网官方网站-168开奖网下载