關於我們

當前所在頁麵:首頁 > >正文

公司(sī)新聞(wén)

Introduction of the second generation pneumatic hammer

點擊數:2995    發布日期:2016-12-13

KLSX  second generation pneumatic hammer impact type structure is advanced. Falling powder device, the product is novel and unique. The utility model is used for preventing the adhesion, blockage and bridging of the powder in the pipeline, the hopper and the silo. The principle of the use of air power, by adjusting the air pressure to adjust the intensity of tapping. Knocking on the outer wall of the equipment without deformation. It is widely used in chemical, fertilizer, food, ceramics, glass, cement, pharmaceuticals, plastics, fuel and other powder processing industry.

Chinese Name: pneumatic hammer
The patent company: Fenghua Kechuan Power Technology Co. Ltd.
Brand name: KLSX
Category: pneumatic impact type

Brief introduction of pneumatic hammer
The utility model relates to a pneumatic hammer which is an impact structure, and is an advanced powder falling device. The utility model is used for preventing the adhesion, blockage and bridging of the powder in the pipeline, the hopper and the silo. By using the principle of air force, the impact force can be adjusted by adjusting the air pressure. The outer wall of the equipment is hit without deformation, and has the explosion-proof function, and is widely used in chemical, fertilizer, food, ceramics, glass, cement, pharmaceuticals, plastics, fuel and other powder processing industry.

The defects of traditional pneumatic hammer
The traditional technology of pneumatic hammer, its structure is the magnet energy storage form, inside of which a magnet attracting a hammer base on fixed pressure air source to forcibly pushed hammer, the hammer hit out, followed by three solenoid valve breathe, then installed under the hammer to hammer on the elastic reset spring to complete a shock.

This kind of pneumatic hammer has several defects
1 Due to repeated impact hammer, hammer on the magnet is easy to crack, resulting in reduced intensity, or suck.
2 Because of the hammer on the magnet and the substrate pull, the need to rely on the fixed pressure of the gas source to push the hammer, so that the impact of a single strength and can not be adjusted, will have a greater damage to the bunker.
3 The structure of the pneumatic hammer for hammer steel casting material, the weight is heavy, easy to make the hammer installed under the spring fatigue, or even broken. Difficult to reset.
4 Noise is too large, no dust protection.

The advantages of the second generation pneumatic hammer
1 The internal hole of pneumatic hammer is stainless steel structure
2 Through the adjustment of the power supply by adjusting the air pressure.
3 If the power is too small to be able to row block can increase the pressure, on the contrary, the impact of excessive pressure drop.
4 If the customer due to improper selection of models appear the impact force is too strong or lack of error phenomenon, also can be solved by adjusting the air hammer tapping force. This structure can change the impact force to ensure the convenience of the selection of air hammer.
5, Such as through the relay port connection, you can achieve a number of impact type pneumatic hammer series operation, while fighting.
The utility model is an ideal cleaning device without pollution and low energy consumption.




168官方开奖App-168开奖网官方网站-168开奖网下载